$120.00 - AQUATEC 8800 SERIES BOOSTER PUMP

 

HIGH FLOW PUMP FOR MEMBRANES FROM 50-150 GPD

 

THIS IS A QUALITY BUILT 24 VOLT PUMP THAT WILL BOOST YOUR RO/DI SYSTEM PRESSURE IF YOU HAVE LOW WATER PRESSURE

 

WORKS EXCELLENT FOR PEOPLE ON WELL WATER TO BOOST RO/DI SYSTEM PRESSURE

 

$28.00 - AQUATEC 8800 TRANSFORMER

 

NEEDED FOR 8800 BOOSTER PUMP

$4.00- AQUATEC WIRING HARNESS

 

THIS HARNESS WILL ALLOW YOU TO WIRE A SOLENOID OR FLUSH TIME INTO YOUR TRANSFORMER

 

$57.00 - 75 GPD AUTO-FLUSH TIMER VALVE

FOR 8800 BOOSTER PUMP

Upon system start-up and every hour thereafter, the 24 VAC normally closed solenoid valve automatically "power-flushes" the membrane at full pump flow, or full line pressure in unboosted systems, for 18 seconds every hour. Turbulent water action scrubs organic and inorganic contaminants from the membrane surface, extending membrane life and efficiency. The AFR 600 requires its own transformer or can be powered by the pump transformer. The valve has a built in, self cleaning, flow restrictor which allows controlled flow to drain when the valve is in the de-activated (closed) state.

$20.00 - AQUATEC 6800 TRANSFORMER

 

NEEDED FOR 6800 BOOSTER PUMP

$4.00- AQUATEC WIRING HARNESS

 

THIS HARNESS WILL ALLOW YOU TO WIRE A SOLENOID OR FLUSH TIME INTO YOUR TRANSFORMER

24 VOLT 2 WAY NORMAL CLOSED 1/8” PORT SOLENOID VALVE WITH ¼” QUICK FITTINGS USE WITH AUTO TOP-OFF CONTROLLER OR ON A TIMER.

• SOLENOID OPENS WHEN POWERED BY CONTROLLER OR TIMER
• LOW VOLTAGE 24 VOLT TRANSFORMER FOR SAFETY
• QUICK PLUG ELECTRICAL FITTINGS
• 24 VOLT TRANSFORMER INCLUDED
• 1/8 X 1/4 QUICK FITTINGS INCLUDED

24 VOLT 2 WAY NORMAL CLOSED 1/8” PORT SOLENOID VALVE WITH ¼” QUICK FITTINGS USE WITH AUTO TOP-OFF CONTROLLER OR ON A TIMER.

• SOLENOID OPENS WHEN POWERED BY CONTROLLER OR TIMER
• REQUIRES LOW VOLTAGE 24 VOLT TRANSFORMER
• QUICK PLUG ELECTRICAL FITTINGS
• 1/8 X 1/4 QUICK FITTINGS INCLUDED